Buying used appliances online can save money, but the listed price is only one part of the decision. This checklist helps you verify condition, fit, compatibility, safety, delivery, installation, and likely ownership costs before committing to a refrigerator, washer, dryer, dishwasher, or range.
Overview
A used appliance is a practical purchase only when it works for your space, household, utilities, and budget. A low purchase price can become less attractive if the appliance needs missing parts, specialized installation, a long-distance delivery, or an early repair.
Before you buy, treat each listing as a set of questions rather than a complete product record. Confirm the exact model, inspect the condition, ask for an operating demonstration, and calculate the total cost of ownership. If the seller cannot answer basic questions or provide clear photos of the model label and problem areas, consider that uncertainty a cost.
This guide uses a simple comparison:
Total estimated cost = purchase price + delivery + hookup or installation + immediate parts or repairs + expected early operating costs
You do not need perfect numbers. The goal is to compare listings consistently and identify purchases where the possible downside is too large. For broader payment, pickup, and fraud precautions, see this guide to buying used items safely online.
How to estimate
1. Establish the replacement requirement
Write down what the appliance must do before you browse listings. For a refrigerator, note the maximum width, height, and depth, door-swing needs, preferred capacity, water or ice connections, and the location of the outlet. For a washer or dryer, record the available width, depth, vent or drain requirements, electrical supply, and whether the door or lid can open fully. For a range or dishwasher, check the opening size, fuel type, electrical connection, and installation arrangement.
Measure the route into the home as well as the final opening. Include doorways, stairs, hallways, elevators, turns, and clearance needed to tilt or carry the appliance. A listing can match the cabinet opening and still fail at the front door.
2. Calculate the all-in purchase cost
Use a worksheet with one row per listing. Record the advertised price separately from every additional cost:
- Purchase price: The amount paid to the seller or marketplace.
- Delivery or transport: Seller delivery, a hired vehicle, movers, or fuel.
- Stairs and difficult access: Any additional handling fee or equipment requirement.
- Hookup or installation: Plumbing, venting, electrical, gas, leveling, or appliance-specific labor.
- Parts: Hoses, cords, brackets, filters, shelves, racks, trays, or adapters not included.
- Immediate repair allowance: A deliberately conservative amount for problems that cannot be fully ruled out.
- Operating cost: A rough estimate based on the appliance label, stated specifications, usage, and local utility rates.
Compare the result with the cost of another listing or a new equivalent, but do not treat the difference as guaranteed savings. A used appliance with an uncertain repair history deserves a larger contingency than one with a clear model number, recent service documentation, and a successful operating test.
3. Use a decision threshold
Set a maximum acceptable total cost before making an offer. You might also set a maximum age, a minimum remaining feature set, or a maximum repair allowance. If a listing exceeds any non-negotiable limit, remove it from consideration rather than rationalizing the purchase because the initial price looks attractive.
For a repeatable comparison, score each listing as ready to buy, buy only after verification, or too uncertain. The score should reflect evidence, not optimism.
Inputs and assumptions
Model, age, and recall checks
Ask for a photo of the manufacturer label, usually found inside the door, on the frame, behind a drawer, or on the rear panel. Record the model number and serial number where available. The model number helps you verify dimensions, fuel or electrical requirements, compatible parts, original features, and product documentation. The serial number may be needed for a recall or service-history search.
Search the manufacturer or relevant consumer-safety recall database using the exact model information. Do not assume that a familiar brand or clean appearance proves that an appliance is safe. If a recall applies, confirm whether the remedy was completed and documented.
Condition and operating evidence
Request close photos of seals, hinges, knobs, racks, shelves, hoses, cords, drum interiors, burners, and any rust or water staining. Ask directly about leaks, unusual noise, error codes, temperature problems, vibration, smoke, burning smells, and previous repairs.
Whenever practical, test the appliance before payment:
- Refrigerator: Check that it powers on, the interior light works, doors seal evenly, and the unit does not show obvious water or oil leakage. A short demonstration cannot prove long-term cooling performance, so ask about temperature history and service.
- Washer: Run a fill, agitation or tumbling, drain, and spin cycle if possible. Look for leaks, severe vibration, error codes, and a door or lid that fails to lock or close.
- Dryer: Confirm that the drum turns, the controls respond, the door closes, and the appliance heats appropriately during a brief test. Verify the venting arrangement and whether the required cord is included.
- Dishwasher: Check the door seal, racks, spray arms, drain area, controls, and a short wash or drain cycle. Look for standing water or evidence of leaks under the unit.
- Range: Test each burner or heating element, oven controls, lights, and door seal where safe to do so. Confirm whether the unit is designed for the fuel type and connection available in your home.
Compatibility and installation assumptions
Never infer compatibility from appearance. Confirm dimensions, hinge side, ventilation clearance, fuel type, voltage, plug or terminal arrangement, water connections, drain requirements, vent size, and leveling needs. A professional may be required for gas, hardwired electrical, or complex plumbing connections. If installation requirements are unclear, obtain an estimate before purchase.
Also list what is missing. A refrigerator without the correct shelf, a washer without compatible hoses, or a dryer without the appropriate cord can be usable but not immediately ready. Check whether replacement parts are available and whether their cost changes the decision.
Worked examples
The following examples use hypothetical figures to show the method. Replace them with quotes and estimates for your location.
| Cost category | Listing A: washer | Listing B: washer |
|---|---|---|
| Purchase price | $180 | $260 |
| Delivery or transport | $70 | $70 |
| Hoses or missing parts | $35 | $0 |
| Installation | $0 | $40 |
| Repair contingency | $150 | $60 |
| Estimated total | $435 | $430 |
Listing A appears cheaper at first glance, but the missing parts and greater uncertainty narrow the difference. Listing B may be the stronger choice if its model, test results, and service history are better documented. If either washer fails the fit or connection check, neither is a sensible purchase regardless of price.
For a second example, imagine a refrigerator priced at $300. Add a $90 transport estimate, $25 for a required filter or connector, and a $200 repair contingency because the seller cannot demonstrate reliable cooling. The working estimate is $615 before operating costs. A similar listing at $420 with documented cooling, included accessories, and lower uncertainty may offer better value even though its advertised price is higher.
Keep these calculations in the same currency and use the same assumptions for every listing. If one seller includes delivery and another does not, separate those line items instead of comparing headline prices.
When to recalculate
Recalculate your estimate whenever a key input changes: the seller confirms a different model, delivery becomes more expensive, a required part is missing, installation requires a specialist, or a test reveals a leak, error code, unusual noise, or temperature problem. Recheck model documentation and recall information immediately before purchase if the listing has been active for a while.
Prices for transport, labor, parts, and utilities can change, so refresh those inputs rather than relying on an old comparison. Revisit the calculation if you move, change the installation location, or discover that the appliance will receive heavier use than originally expected.
Before paying, use this final sequence:
- Confirm the exact model, dimensions, age information, and required connections.
- Compare the appliance with the access route and installation opening.
- Review close-up photos and ask about repairs, faults, missing parts, and recalls.
- Test the appliance or request a clear demonstration of its key functions.
- Get delivery, hookup, and removal costs in writing before agreeing.
- Calculate the all-in cost with a repair contingency.
- Use a protected payment method and keep the listing, messages, and receipt.
If you are still comparing several listings, the same evidence-first approach can help with used electronics and used furniture, where fit, condition, transport, and hidden costs also affect the real value.